Source mechanism and parameters of the 19 October 2012 earthquake, northern Egyptian continental margin

Abstract

© 2016, Saudi Society for Geosciences. The 19 October 2012 earthquake (ML = 5.1) occurred in the northern continental margin of Egypt within the Nile Cone at latitude 32.35° N and longitude 31.27° E. The quake was felt over a wide area in north Egypt and East Mediterranean countries, but no casualties have been reported. This area had experienced the large earthquake (Ms = 6.7) of 12 September 1955. The fault plane solution of the 19 October 2012 earthquake is here presented based on the digital seismograms recorded by the Egyptian National Seismological Network (ENSN) and other regional seismic stations. The analysis is carried out using the well-known techniques of first motion polarities of P-wave and the amplitude ratios of P-, SH-, and SV-waves with lower hemisphere projection. The fault plane solution based on the first P-wave onset demonstrates a left lateral strike-slip faulting mechanism, while the solution based on both P-wave polarities and amplitude ratios of P-, SH-, and SV-waves reveals a reverse fault with strike-slip component trending NW–SE to NE–SW, in conformity with the N–S compression along the Hellenic Arc convergence zone. Following the Brune’s model, the source dynamic parameters for the 19 October 2012 earthquake are estimated as corner frequency = 1.47 Hz, fault radius = 0.7 km, stress drop = 22.1 MPa, seismic moment = 2.80E + 16 Nm, and moment magnitude Mw = 4.9. These parameters may provide important quantitative information for the seismic hazard assessment studies.