Acetonitrile-Ethyl acetate based method for the residue analysis of 373 pesticides in beeswax using LC-MS/MS and GC–MS/MS

Abstract

In the current study, Pesticide residue extraction in beeswax was carried out using a mixture of acetonitrile-ethyl acetate (1:3, v/v). This mixture of solvents not only enables the melting of beeswax sample at a lower temperature than when using acetonitrile only but also introduces one phase solution. The sample extract was directly injected into both GC–MS/MS, of the commonly used split-less inlets, and into LC-MS/MS. Sample preparation and clean-up were also optimized. The developed method was validated according to SANTE/11813/2017 European Union guidelines. Three spiking levels of low concentrations 20, 50, 100 µg/kg were studied for the analysis of a total of 373 pesticides. Most of the studied pesticides have acceptable recovery between 80 and 110% with good reproducibility <10. There are 265 and 139 pesticides having a lower limit of quantifications equal 20 µg/kg using LC-MS/MS and GC–MS/MS, respectively. Finally, the developed method was successfully applied for the analysis of real beeswax samples.