Effect of incorporation of nano-graphene oxide on physicochemical, mechanical, and biological properties of tricalcium silicate cement

Abstract

Objective: Evaluation of setting time, compressive strength, pH, calcium ion release, and antibacterial activity of mineral trioxide aggregate (MTA) after modification with three different concentrations of nano-graphene oxide (GO) powder compared to unmodified Biodentine as a commercial control. Methods: GO powder, unhydrated and hydrated cements were characterized using Environmental Scanning Electron Microscope (ESEM) with Energy Dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman Spectroscopy, and Fourier Transform Infrared spectroscopy (FTIR). GO was also analyzed using Scanning Transmission Electron Microscope (STEM) to determine average lateral dimensions. Specimens were prepared and grouped according to the concentration of GO added to Rootdent MTA (control, 1, 3, and 5 wt%) and the material used (MTA and unmodified Biodentine) into five groups. Setting time was evaluated using Gillmore penetrometer (n = 5). Compressive strength was evaluated using universal testing machine (n = 7). pH and calcium ion release were assessed using pH meter and Induced Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) at 1, 7, 14, and 28 days (n = 7). Antibacterial activity was evaluated against Streptococcus mutans using direct contact test (n = 7). One-way and repeated measures ANOVA followed by Tukey's post hoc test were used for data analysis with significance level set at p ≤ 0.05. Results: Addition of GO to MTA reduced both initial and final setting time. GO modified MTA groups and unmodified Biodentine showed significantly increased calcium ion release at 14 and 28 days. All cements showed alkaline pH of the storage media at all tested time intervals. 1 wt% GO recorded the highest compressive strength values in MTA modified groups. The increased concentration of GO from 1 to 5 wt% successively increased antibacterial activity of MTA, with Biodentine showing the lowest significant value. Conclusion: Addition of 1 wt% GO can significantly improve the tested properties of tricalcium silicate-based cements without compromising their compressive strength. Clinical significance: GO is a promising modification for tricalcium silicate cements to improve setting time, compressive strength, and antibacterial activity to provide a variety of materials for different clinical situations. This in turn can reduce the risk of reinfection and allow placement of the final restoration in a single visit.