Optimization of buffer-window layer system for CIGS thin film devices with indium sulphide buffer by in-line evaporation
Spiering, S; Nowitzki, A; Kessler, F; Igalson, M; Abdelmaksoud, Heba;
Abstract
Compound In2S3 powder was evaporated on Cu(In,Ga)Se2 substrates from the ZSW inline multi-stage co-evaporation process. Laboratory devices with the complete layer structure Mo/CIGS/In2Sx/i-ZnO/ZnO:Al/Ni-Al grid on 0.5 cm2 total cell area were prepared and analysed for their J-V characteristics. A post-annealing step in air after completing the device is essential to enhance the cell performance. In this work the influence of window process conditions like process temperature, layer thickness and sputtering gas composition on the cell characteristics was investigated. Electrical characterisation by temperature-dependent current voltage and admittance spectroscopy were performed to better understand the impact of buffer parameters on electrical transport. By optimization of the buffer layer thickness in combination with window layer variations, cell efficiencies >16% could be achieved. A record cell efficiency of 18.2% with anti-reflective coating was obtained.
Other data
Title | Optimization of buffer-window layer system for CIGS thin film devices with indium sulphide buffer by in-line evaporation | Authors | Spiering, S; Nowitzki, A; Kessler, F; Igalson, M; Abdelmaksoud, Heba | Keywords | CIGS;In2S3;Buffer layer;Thermal evaporation;Electrical transport;SOLAR;TRANSPORT | Issue Date | 2016 | Publisher | ELSEVIER SCIENCE BV | Journal | SOLAR ENERGY MATERIALS AND SOLAR CELLS | Volume | 144 | Start page | 544 | End page | 550 | ISSN | 0927-0248 | DOI | 10.1016/j.solmat.2015.09.038 | Scopus ID | 2-s2.0-84945246450 | Web of science ID | WOS:000366223900070 |
Recommend this item
Similar Items from Core Recommender Database
Items in Ain Shams Scholar are protected by copyright, with all rights reserved, unless otherwise indicated.