Collection's Items (Sorted by Submit Date in Descending order): 761 to 780 of 1751
| Issue Date | Title | Author(s) |
| Sep-2021 | COVID-19 deterministic and stochastic modelling with optimized daily vaccinations in Saudi Arabia | A. M. Omar, Othman ; Alnafisah, Yousef; Elbarkouky, Reda A; Ahmed, Hamdy M |
| 1-Feb-2023 | Characteristics of hollow bluff body-stabilized natural gas-air premixed flames with heat recirculation | Hamed, Ashraf ; Kamal, M. M.; Hussin, A. E. |
| 15-Nov-2021 | Effect of water atomization on properties of type 4130 steel processed by L-PBF | Abdelwahed, M. ; Bengtsson, S.; Casati, R.; A. Larsson; Petrella, S.; Vedani, M. |
| 1-Apr-2019 | Charge-Steering Flip-Flop for Ultra-High-Speed Wireline Applications | Hassan, Khaled M.; Ibrahim, Sameh |
| Apr-2023 | Nonlinear Analysis of Punching Behavior of Flat Slab at Corner Column Under Effect of Vertical Load | Hala Atef Ahmed; Ayman Hussein Hosny Khalil; El-Kateb, Mahmoud |
| May-2021 | Flexural Behavior of RC Continuous Slabs Strengthened by External Prestressing Systems | Mohamed AbuGazia; Mohamed El-Sefy; El-Kateb, Mahmoud ; Sébastien Maheux; Tamer El-Afandy; Amr Abdelrahman |
| Jun-2022 | Numerical investigation for strengthened RC footings with square concrete jacketing | Mohamed Attia Fouda; Amr Ibrahim; El-Kateb, Mahmoud ; Tamer Elkateb; Ayman Khalil |
| 2022 | Effect of NSM Technique on Moment Redistribution in Top Strengthened RC Continuous Beams | Shady Salem; Amr Ibrahim; El-Kateb, Mahmoud ; Ayman Khalil; Mohamed Attia |
| Dec-2021 | Numerical investigation for failure load and contact stress beneath RC square footing resting on cohesionless soil | Mohamed Attia Fouda; El-Kateb, Mahmoud ; Ayman Khalil |
| Feb-2016 | Failure Prediction of Fiber Reinforced Polymer Pipes using FEA | Ahmed W. Abdel-Ghany ; Iman Taha; Samy J. Ebeid |
| 1-Jan-2023 | Microstructural strengthening and mechanical performance of Ti-bearing Al5Cr12Fe35Mn28Ni20 high-entropy alloy | Elkatatny, Sally; Ahmed W. Abdel-Ghany ; Hamada, Atef; Chiba, Akihiko; Gepreel, Mohamed A.H. |
| 23-Jun-2020 | Microstructure and Mechanical Properties Investigation of New Al10Cr12Mn28Fe(50-x)Ni(x) High Entropy Alloys | Ahmed W. Abdel-Ghany ; Sally Elkatatny; Mohamed Abdel Hady Gepreel |
| 1-Jun-2020 | The influence of adding marble and granite dust on the mechanical and physical properties of PP composites | Awad, A. H.; Ahmed W. Abdel-Ghany ; Abd El-Wahab, Ayman A.; El-Gamasy, Ramadan; Abdellatif, Mohamed Hazem |
| 20-Dec-2022 | Hot deformation behavior and constitutive modeling of a cost-effective Al8Cr12Mn25Ni20Fe35 high-entropy alloy | Ahmed W. Abdel-Ghany ; Jaskari, Matias; Hamada, Atef S.; Järvenpää, Antti; El-Hofy, Hassan A.; Chiba, Akihiko; Gepreel, Mohamed Abdel Hady |
| May-2022 | Assessing the Nonlinear Load-Deformation Relationships of Vertically Loaded Shallow Foundations on Clays using the Seismic Piezocone Testing | Ahmed, Sayed ; Agaiby, Shehab |
| 17-Feb-2023 | Comparison between uniaxial and pull-out tests setup for polyester and HDPE geogrids | Sayed, Sherif; Morsy, Mohamed S.; Ahmed, Sayed ; Elhanafy, Ahmed M. |
| 1-Jan-2017 | Correlating the shear wave velocity with the cone penetration test | Ahmed, Sayed |
| 1-Jun-2018 | Assessment of clay stiffness and strength parameters using index properties | Ahmed, Sayed |
| 1-Apr-2021 | Undrained shear strength assessment using piezocone and shear wave measurements | Ahmed, Sayed ; Agaiby, Shehab S. |
| 1-Jan-2018 | Prediction of shear wave velocities in soft to firm clays using consolidation tests | Ahmed, Sayed |
Collection's Items (Sorted by Submit Date in Descending order): 761 to 780 of 1751
