|
| Issue Date | Title | Author(s) |
| 3-Aug-2012 | Analysis of the Draping Behaviour of Multi-Layer Textiles using Digital Image Processing | Ebeid, Samy ; I. Taha, Y. Abdin |
| 2013 | Comparison of Picture Frame and Bias-extension Tests for the Characterization of Shear Behaviour in Natural Fibre Woven Fabrics | Ebeid, Samy ; I. Taha ; Y. Abdin |
| 2018 | Correlation of injection moulding parameters with mechanical and morphological aspects of natural fibre reinforced thermoplastics | M.A. Saleh,, ; I. Taha ; Ebeid, Samy |
| Jan-2015 | Effect of Geometry and Rotational Speed on the Axial Pressure Profile of a Single Screw Extrusion | Ebeid, Samy ; W.E. Abdel-Ghany ; I. Fikry |
| 16-Feb-2014 | Effect of Process Parameters on Abrasive Water Jet Plain Milling | M. R. A. Atia ; Mahmoud, Moustafa ; Samy J. Ebeid |
| 23-Dec-2014 | Effect of Process Parameters on Abrasive Water Jet Plain Milling | Ebeid, Samy ; M. M. Sayed ; M. R. A. Atia |
| 2015 | Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene | Samy J. Ebeid ; M. Dawoud ; I. Taha, |
| Nov-2014 | Effect of Thermal and Mechanical Loads On A Non Parallel Face Flanges Using Finite Element Analysis | Ebeid, Samy ; W.E. Abdel-Ghany ; Mohamed Salama |
| Feb-2016 | Failure Prediction of Fiber Reinforced Polymer Pipes using FEA | Ebeid, Samy ; Iman Taha ; Ahmed W. Abdel-Ghany |
| Jun-2015 | Improved Energy Efficiency in Troughed Belt Conveyors: Selected Factors and Effects | Ebeid, Samy ; Gerges S. Youssef ; Iman Taha ; Lamia A. Shihata ; Abdel-ghany ; Wagdy E |
| 3-Nov-2015 | Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques | Samy J. Ebeid ; Michael Dawoud ; Iman Taha |
| Jul-2015 | Mechanical Design Aspects of Single Screw Extruders using Finite Element Analysis | Ebeid, Samy ; I. Fikry ; W.E. Abdel-Ghany |
| Feb-2018 | Optimization of EDM process parameters for Al-SiC reinforced metal matrix composite | Ebeid, Samy ; Hany A. Shehata ; A. M. Kohail |
| 1-Sep-2014 | Prediction of Abrasive Water Jet Plain Milling Process Parameters Using Artificial Neural Networks | Samy J. Ebeid ; Mahmoud, Moustafa ; M. M. Sayed ; M. R. A. Atia, |
| Sep-2014 | Prediction of Abrasive Water Jet Plain Milling Process Parameters Using Artificial Neural Networks | Ebeid, Samy ; M. M. Sayed ; M. R. A. Atia |
| May-2012 | Prediction of Draping Behavior of Woven Fabrics over Double-Curvature Moulds Using Finite Element Techniques | I. Taha ; Y. Abdin ; Ebeid, Samy |
| Dec-2014 | Shakedown and limit load of pipe bends with local wall thinning under combined internal pressure and cyclic in-plane bending moment | Ebeid, Samy ; M.R Kasem ; W.E. Abdel-Ghany |
